To use the ESIA Unity solution in the best possible conditions, you need the following:
To use the ESIA Galaxy solution, you need to install the software on a server (physical or virtual) with the following configuration:
This is the MINIMUM configuration for standard use of ESIA Galaxy. Depending on your needs (number of services), we may recommend a higher configuration. Please contact our technical department for more information.
If the Galaxy is used as a satellite for an Infinity or Universe server, these must have HTTPS access to the Galaxy server.
To use the ESIA Infinity solution, the software must be installed on a server (physical or virtual) with the following configuration:
This is the RECOMMENDED configuration for standard use of ESIA Infinity. Depending on your needs (number of services), we may recommend a higher configuration. Please contact our technical department for more information.
To use the ESIA Universe solution, you need to install the software on a server (physical or virtual) with the following configuration:
This is the RECOMMENDED configuration for standard use of ESIA Mercury. Depending on your needs (number of services), we may recommend a higher configuration. Please contact our technical department for more information.
For installation, updates and modifications to Esia licences, your server must have the following network access:
On ports 80 and 443 (input and output on the Internet) :
Official Debian repositories (choice of one or the other)
French repositories : ftp.fr.debian.org/debian%
Belgian repositories : ftp.be.debian.org/debian .
ESIA repositories : stable.repository.esia-sa.com
Esia license validation server : licence.esia-sa.com
(Esia Unity/Mercury only) Unity connection server : infogesa.esia-sa.com and infogesa.esia-network.com.
At the port 22 (inbound from your local network to the Esia server) for SSH administration
(Esia Unity/Mercury only) port 2080 (input from internet)