SNMP activation on IBM TS3XXX, TS4XXX

This tutorial has been made available to the entire Esia community thanks to the contribution of our partner DECI Développement.

Their website: https://decidev.fr

Once you have logged in, you will be taken to the robotics page, as shown in the image below.

Click on 'Configure Library', 'SNMP', and you will arrive on the SNMP configuration page. As shown below:

Check the “Enabled” box, indicate the SNMP community, the IP address of your Esia server in the “Target 1 - IP Address” field and choose the “SNMPv2” version in the “version” field. Then click on 'Submit', a pop-up like the one below will ask you for confirmation, click on OK.

SNMP is now activated on your robotics.