Table of Contents
List of services available with ESIA Infinity
Service names
The naming of services within Esia Unity follows a certain pattern: <méthode de connexion>_<protocole>_<plateforme>_<service testé>
For example :
GESA_SNMP_WINDOWS_STORAGE
- GESA: test via the ESIA Unity box.
- SNMP: uses the SNMP protocol.
- WINDOWS: for all Windows OS.
- STORAGE: tests the storage space used on a drive.
Another example :
CHECK_HTTPS
- CHECK: test directly from the server
- HTTPS: if an HTTPS server is present
Basic tests
CHECK_ICMP
Tests the ping of a node. Also provides network latency information. This service is run from the server, so testing a local address such as 192.168.1.1 will not work.
| Parameter | Description |
|---|---|
-H <host> | The IP address or name of the host to be tested |
-w <latences ms>,< % de paquet perdu> | Indicates the alert threshold in ms and in % of lost packets |
-c <latences ms>,< % de paquet perdu> | Indicates the critical threshold in ms and in % of packets lost |
Example:
-H google.be -w 200,50 -c 300,100
Output :
OK - google.be: rta 28,629ms, lost 0%|rta=28,629ms;200,000;300,000;0; pl=0%;40;80;;rtmax=28,742ms;;;; rtmin=28,473ms;;;;
NAS tests
QNAP
CHECK_SNMP_QNAP_HEALTH
Tests the health of a QNAP NAS (QNAP NAS-MIB compatible).
This plugin retrieves and checks :
- The model and system name
- System temperature
- CPU temperature
- Disk status (model, capacity, smart status and temperature)
- RAID volume status
| Parameter | Description |
|---|---|
-H <host> | Host name (default $IP) |
-C <communauté snmp> | Host name (default $SNMP_COM) |
-v [1-2] | SNMP version (default 2) |
-w <température en dégré Celsius> | System warning temperature (default: 50) |
-c <température en dégré Celsius> | System critical temperature (default: 70) |
Example :
-H 192.168.1.22 -C public -w 50 -c 70
Output :
Model: HS-210 Hostname: NASDF8958 OK: System temperature: 43 C/109 F < 50 C OK: CPU temperature: noInfo OK: DISK 1 : HDD1 (Model: ST1000DM003-1CH1 Capacity: 931.51 GB) status is: ready (SMART:GOOD) . Temperature is 39 C/102 F OK: DISK 2 : HDD1 (Model: ST1000DM003-1CH1 Capacity: 931.51 GB) status is: ready (SMART:GOOD) . Temperature is 40 C/104 F WARNING: Volume 1 software raid status is Rebuilding.
Printer tests
CHECK_SNMP_PRINTER
Tests the general status of an SNMP MIB-compatible printer.
This plugin retrieves and checks :
- Printer status (paper jam, cover open, out of paper, etc)
- Its system description (model, SN, etc)
- The status of each consumable
| Parameter | Description |
|---|---|
-H $IP | IP address of the test host (default:$IP) |
-C $SNMP_COM | SNMP community |
-w 20 | The alert threshold in % remaining of the consumable level. |
-c 10 | The critical threshold in % of the remaining level of consumables. |
Example:
-H 192.168.1.22 -C public -w 20 -c 10
Output :
Printer is OK Description: HP ETHERNET MULTI-ENVIRONMENT,SN:CND8FBTBLB,FN:SF45SDW,SVCID:24014,PID:HP LaserJet 400 colorMFP M475dw CRITICAL : 2. Description: Cyan Cartridge HP CE411A (cyan) State: 3% <= 10% OK : 3. Description: Magenta Cartridge HP CE413A (magenta) State: 99% OK : 1. Description: Black Cartridge HP CE410X (black) State: 72% CRITICAL : 4. Description: Yellow Cartridge HP CE412A (yellow) State: 3% <= 10%
en/intro/liste_services_infinity.txt · Last modified: 2023/11/09 17:57 by q.george
