Table of Contents
Unity reset procedure
Resetting the Unity
Take a usb key/external hard disk.
(The device must be formatted in FAT32 or ext2-4).
Create the file “ esia_unity_reset.txt “containing the following line :
- copy
code=31c2a41ec61f3603587178027e7dc6bc791fa173
Plug in the usb key/disk containing the file ” esia_unity_reset.txt “on the unity (you can choose between 4 usbs locations).
Wait at least 15 seconds before disconnecting the disk from the unity. After 2 minutes, the unity will be reset. Even if there is no apparent reaction from the unit, it will automatically be reset internally.
If your disk is in rw mode, an ” esia_unity_reset.log “will appear on it next to the esia_unity_reset.txt ”
If this does not work
<HTML>
<style>
#if_it_does_not_work {
font-weight: bold;
}
</style>
</HTML>
- This works with USB sticks and any drive with an external power supply. If your drive is self-powered, the unity power supply may not be able to supply enough power to both devices (unity + drive).
- Check that the ” esia_unity_reset.txt “is located on a FAT32 or Linux (ext2-4) partition. It will not work with an NTFS formatted partition.
- If you are using windows and the « Extensions de noms de fichiers >If you are using Windows and the > is not activated, when you right-click ⇒ New ⇒ Text document, do not add .txt to the filename, otherwise the result will be : « esia_unity_reset.txt.txt » . This will not work. To be sure of avoiding this problem, we advise you to check the box « Extensions de noms de fichiers » box in the « Affichage » tab of Windows Explorer.
Advanced use
By default, the procedure configures the unit with its initial network configuration and then reboots it. However, you can add parameters (system and reset) to the ” esia_unity_reset.txt “file in order to change the way it normally works and thus have this in our :
- copy
# Needed code=31c2a41ec61f3603587178027e7dc6bc791fa173 # Default = restart, can be none, restart, shutdown system=none # Default = yes, can be no reset=yes
In the example above, the unity will return to its default configuration and reconfigure its network parameters (parameter resetparameter) without rebooting the unity ( system).
