To configure snmp on your Proxmox hypervisor, you first need to install the snmpd package with the command :

copy

apt-get install snmpd

Then edit the configuration file :

copy

nano /etc/snmp/snmpd.conf

Change the line ( or put it as a comment ) and replace it with :

agentAddress udp:127.0.0.1:161

by

copy

agentAddress udp:0.0.0.0:161

The next step is to configure the SNMP community:

copy

rocommunity read_community default

or rocommunity “ community name ” “ range ip (unique ip ) /subnet mask ”.

copy

rocommunity read_community 10.7.0.14/32

Then restart the SNMP service by typing :

copy

/etc/init.d/snmpd restart